Table of Contents
Advertisement
17.Select the required options with the
.
/
ð Satellite Status: Select On.
ð Satellite Selection: Press
the satellite you want to search for and
press the
.
ð Scan Mode: Select Full or Network.
ð Scan Type: Select for unencrypted
channels only Only Free Channels, en-
crypted channels only Encrypted
Channels Only or for all satellite chan-
nels All.
ð Channel Store Type: Select for TV
channels only Only Digital Channels,
for Radio channels only Only Radio
Channels or for all channels All.
18.Select LNB Settings and press the
19.Select the required options with the
.
/
ð LNB Power: Press
power On then press
ð LNB Frequency: Press
LNB frequency used in the satellite sys-
tem and press again the
20.DiSEqC Port: Press
ð DiSEqC Port menu will be displayed.
, select
.
and select LNB
.
and select
.
.
EN / 95
Disable
DiSEqC A
DiSEqC B
DiSEqC C
DiSEqC D
ð To select the satellite corresponding to
the relevant DiSEqC positions in the
satellite system, select DiSEqC A, DiS-
EqC B, DiSEqC C or DiSEqC D.
Note:
• If Antenna Type, DiSEqC 1.1 is selected,
make a selection between Uncommit 1
and Uncommit 16.
21.Return to the Automatic Channel Scan
menu by pressing the
Note:
• Make the settings described in steps 16
to 20 for other three satellites you want
to scan.
22.After completing the settings individu-
ally for all four satellites, from the Auto-
matic Channel Scan menu Next and
press
.
ð Automatic Search menu will be dis-
played and the search for TV stations
shall start.
ð Search may take several minutes de-
pending on the number of television
stations received.
23.Press
to return to the previous menu,
press
to return to TV broadcast or
press
to return to Home menu.
twice.
Advertisement
Table of Contents
