Table of Contents
Advertisement
19 Network Setup
You need wired or wireless internet connec-
tion to use features of Google TV.
• You can establish a wired or wireless
connection between your television and
the local network.
• If you want to use a wired network con-
nection, please start with the instructions
here.
• If you use a wireless network connection,
please follow the instructions in the
"Wireless network connection" section.
Note:
• The following section describes connect-
ing to the home network if you did not
carry this out during the "Initial Set-up".
19.1 Wired Network Connection
Connect the output of modem to the LAN
socket with a Cat 5 cable.
Note:
• Connection cables are not supplied.
19.2 Wired Network Settings
There are two ways of making the wired
network settings.
1. Automatic Connection : all data re-
garding connection settings (IP Ad-
dress, Netmask, Gateway and DNS)
are obtained from modem automatic-
ally.
2. Manual Connection : all data regarding
connection settings (IP Address, Net-
mask, Gateway and DNS) must be con-
figured manually.
19.2.1 Automatic Connection
Most home networks are Dynamic Net-
works. If you have a dynamic network, you
must use a DSL modem that supports
DHCP. Modems and IP sharers supporting
DHCP receive IP Address, Netmask, Gate-
way and DNS values required for internet
access, thus your TV set connects to the
network automatically.
Note:
• If you do not have a dynamic network, fol-
low the instructions in manual connec-
tion section.
19.2.2 Manual Connection
Certain networks require Static IP address.
If your network requires a Static IP address,
you need to enter IP Address, Netmask,
Gateway and DNS values manually. You
can learn the IP Address, Netmask, Gate-
way and DNS values from your Internet
Service Provider (ISP).
1. From Home Screen menu, press
2.
select Settings and press the
3. Select Network and Internet option,
and press
4. Select IP Settings and press the
5. Select Static and press the
6. Enter IP Address and select the
from the screen keyboard and press the
.
7. Enter Gateway and select the
from the screen keyboard and press the
.
8. Enter Network prefix length and select
the
key from the screen keyboard
and press the
9. If applicable, enter the value of DNS1
and select the
keyboard and press the
EN / 87
.
.
.
key from the screen
.
.
.
.
key
key
Advertisement
Table of Contents
