Table of Contents
Advertisement
20 Detailed Channel Settings
20.1 Automatic Search for Digital
Television Channels with
Single Satellite Connection
New satellite channels are added or satel-
lite data is changed frequently. Therefore,
we recommend you to run auto scan func-
tion from time to time.
All transponders are scanned for new chan-
nels.
If there is a direct cable connection
from your satellite antenna to the
TV set, and if there is no common
satellite antenna switchboard, you
need to search over a single cable.
1. Press the
to switch to the TV mode.
2. Press the
, select Source and press
the
.
3. Select Satellite and press the
4. Press the
, select Settings and press
the
.
5. Select Channels & Inputs option, and
press
.
6. Select Channels option, and press the
.
ð Channel menu will be displayed.
7. Select Satellite and press the
8. Select Channel Installation Mode op-
tion, and press the
9. Select Satellite (Standard) or Satellite
(Operator Mode) if you are using an op-
erator, and press the
10.Press the
to return to the previous
menu.
11.Select Automatic Channel Scan op-
tion, and press the
ð Automatic Channel Scan menu will be
displayed.
12.Select Other option, and press
.
.
.
.
.
.
EN / 91
Automatic Channel
Scan
Next
Other
13.Select Single option, and press the
Automatic Channel
Scan
Single
Tone Burst
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
14.Select Current Satellite option, and
press the
.
.
Advertisement
Table of Contents
