Table of Contents
Advertisement
10.8.1 Switching the TV to Standby
During Recording
1. Select the channel with the
to start recording.
2. Press the
on the remote control.
3. Press the
to switch the TV set to the
standby mode.
10.8.2 Recording a Programme from
the Channel List
1. Press the
to open the channel list.
2. Select a channel with the
press the
to confirm.
3. Press the
on the remote control.
ð Recording information will be dis-
played: Recording symbol, channel
name, programme and recording time.
ð These information will disappear after
a short while, the REC symbol and the
recording time appear in the lower left
corner of the screen.
4. Press
to stop recording.
10.9 Sleep Timer
10.9.1 Adding a Record Timer Using
the Electronic Programme
Guide
Electronic programme guide data can be
used for recording.
1. Press the
axis to open the electronic TV guide.
2. Select the channel you want to add a re-
cording timer with the
3. Select the programme you want to add
a recording timer with the
firm with the
ð Programme List - Add menu will be
displayed.
4. From the Programme Type item, select
Save.
...
and
/
on the perpendicular
.
/
and con-
/
.
5. From the Repeat Type item, select
(Once, Week or Every Day).
Note:
or
• To add a recording timer for a pro-
gramme at a time interval other than the
broadcast time specified in the electronic
programme guide, select the Event
Model item, and then select Timing
Schedule.
6. To save the settings, press the
(green).
7. Press
Notes:
• A warning is displayed before the timer
recording starts and counts down for 15
seconds to allow you to switch to the
channel. At the end of 15 seconds, the
channel to be recorded appears automat-
ically.
• If the timer recording starts during play-
back, playback stops. If you do not select
Yes option in the warning prompt, re-
cording will start automatically at the end
of the countdown.
• Only for UPC customers Note: Parts of
previous or next files can be included into
the record while the programme is being
recorded resulting from possible Pro-
gramme Guide errors. In such cases,
keep in mind that the highest family pro-
tection level will apply for the whole re-
cording if one or more of those pro-
grammes have any level of family protec-
tion.
10.9.2 Adding a Record Timer By
Entering the Information
Manually
1. Press the
2. Use the
Save tab.
3. Use the
and press the
EN / 52
to return to the broadcast.
to switch to the TV mode.
and then the
to select the
to select Programme List
.
Advertisement
Table of Contents
