Table of Contents
Advertisement
4.4 Picture Settings
1. Press the
and then the
2. Select
Settings with
3. Select Display & Sound option, and
press
.
4. Select Picture option, and press the
ð Picture menu will be displayed.
Picture
Picture Mode
Vivid
Backlight
100
Brightness
50
Contrast
50
Saturation
50
TONE
0
Sharpness
5. Select the line/function with
select the value/option with
Note:
• Other settings are available under the
Advanced settings.
6. Select Advanced settings option, and
press the
.
7. Select the line/function with
select the value/option with
8. Press
to return to the previous menu
or press
to return to Home menu.
4.4.1 Enhanced Picture Settings
The "enhanced picture settings" are in prin-
cipal digital image improvements however,
these should be only used when necessary,
when picture quality and transmission is
excellent. They may improve the display
.
with poor material, as well, but may ad-
versely affect the display where transmis-
.
sion and picture quality are excellent.
Digital Noise Reduction (DNR): – This
function can only be selected with digital
.
reception sources and AV presets. It re-
duces any interference from artefacts
(pixel blocks) from digital programmes due
to MPEG compression (such as from DVB-
T receivers and lower transmission rates or
DVD players).
Noise Reduction (MPEG NR): – Reduces
the "noise" areas by displaying the picture a
bit sharper and creating a slight blur. Thus,
it must be used as little as possible with
good picture material.
Dynamic Contrast: – This function dy-
namically and optimally adjusts the con-
trast for the respective picture content by
analysing images and then altering this de-
pending on a change in contrast. This in-
crease in the contrast however, may also
reduce the visible brightness levels in the
picture.
Micro Dimming: – Increases the level of
details in dark pictures. The television di-
vides the screen into small sections and
analyses each section individually to de-
termine the best brightness value. This en-
, and
/
sures that more detailed pictures are ob-
or
.
tained in dark contents.
Movie Maker Mode: – This function is
automatically activated when a movie is de-
tected. It closes the PQ blocks and displays
the movie with the picture settings set by
the cinematographer of the movie. The
same colour temperature "Temperature",
, and
/
brightness is set to 200 nits for a movie
or
.
theatre experience.
Skin Colour: – This function provides the
most accurate skin colour by adjusting the
brightness and saturation specific to the
skin colour.
EN / 30
Advertisement
Table of Contents
