Table of Contents
Advertisement
4. Select Format to format the data me-
dium or select Skip to continue without
formatting, and press the
Important:
• It is recommended to format the data
medium for better performance.
• This action will delete all data on the ex-
ternal data medium.
5. The formatting warning message will be
displayed. Select Format and press the
.
ð Formatting progress is displayed on
the screen.
6. When formatting is complete, select the
size you want to reserve for time shift-
ing according to the size of the data me-
dium with the
ð The data medium is manually con-
figured and the Disk Setup Complete
message is displayed.
7. Press
to return to the broadcast.
10.7 Pausing Programs with Time
Shift and Continuous Record-
ing
You can pause any programme you are
watching. For instance, if the phone rings
when you are watching a movie, you can
pause the movie and resume it after the
call without missing anything. The image of
the last scene is stopped and recorded to
the external data medium for time shift.
With the continuous recording feature, TV
records the channel you are currently
watching as much as the time shift
memory you create on external data media.
Thus, you can rewind on the channel you
are watching.
Note:
• Use an external USB disk drive for an un-
interrupted Permanent Time Shift.
1. Press the
during the broadcast.
ð Television picture is paused and delay
time is displayed.
.
and press the
/
2. To continue the broadcast, press the
ð The system continues recording the
broadcast while you are watching it.
Notes:
• The following functions can be used in
the Time Shift mode.
• Fast rewind, press the
for the desired speed;
• Fast forward, press the
for the desired speed;
• To pause, press the
3. To stop time shift, press the
10.8 Recording Programmes
You can record a TV channel. Record data
are stored on external data media and
these recordings are managed by the TV
.
set.
A memory of 44 MB up to 110 MB is re-
quired for a 1 minute record.
Notes:
• Recordings can only performed on USB
memory sticks and hard drives with FAT
and FAT32 format.
• If the product cannot be recovered from
the data playing/sharing/recording mode
due to electrostatic discharge, user inter-
vention will be required.
• If you remove the external data media
during recording, then the recording is
cancelled automatically and no data is re-
corded onto the external data media.
1. Select the channel with the
2. Press the
ð Recording information will be dis-
played: Recording symbol, channel
name, programme and recording time.
ð These information will disappear after
a short while, the REC symbol and the
recording time appear in the lower left
corner of the screen.
EN / 51
several times
several times
.
to start recording.
on the remote control.
.
.
...
or
Advertisement
Table of Contents
