Table of Contents
Advertisement
Automatic Channel
Scan
Single
Tone Burst
DiSEqC 1.0
DiSEqC 1.1
DiSEqC 1.2
Single Cable I
ð Single Cable I: By using a single chan-
nel router, a maximum of 8 different
devices can be broadcast with the
same cable.
ð Single Cable II: By using a single
channel router, a maximum of 32 dif-
ferent devices can be broadcast with
the same cable.
13.Depending on your selection of Single
Cable I or Single Cable II 8 or 32 user
bands will be displayed in the Tuner
menu.
Note:
• Example setup is explained for eight
devices with Single Cable I.
14.Select the required options with the
.
/
ð Tuner: Select between User band 1
and User band 8 and confirm with.
ð Band Frequency: Select the band
frequency with
.
ð User Defined: You can set the band
frequency yourself. From the Band
Frequency field, select User Defined.
and confirm with
/
User Defined option will be displayed
in the Single Cable I menu. Enter user
defined frequency with the
15.Select Next option and press the
ð Automatic Channel Scan menu will
be displayed.
16.Select the first satellite displayed in the
menu and press the
17.Select Satellite Status as On.
18.Select Satellite Selection using the
and select the satellite you wish to use
for searching.
19.Select Scan Mode and select between
All and Network.
20.Select Scan Type.
ð Select Only Free Channels for unen-
crypted channels only
ð Select Encrypted Channels Only for
encrypted channels only
ð Select All for all satellite channels.
21.Select Store Type.
ð Select Only Digital Channels for TV
channels only
ð Select Only Radio Channels for radio
channels only
ð Select All for scanning both options.
22.Select LNB Settings and press the
23.Select Location option, and press the
ð Select the location corresponding to
the satellite you want to search and
press the
24.Return to the Automatic Channel Scan
menu by pressing the
Note:
• Make the settings described in steps 15
to 26 for each satellite you want to scan.
EN / 97
...
.
.
twice.
.
.
.
Advertisement
Table of Contents
