Table of Contents
Advertisement
25.Select Next option and press the
ð Automatic Search menu will be dis-
played and the search for TV stations
shall start.
ð Search may take several minutes de-
pending on the number of television
stations received.
Notes:
• Use installation equipment supported /
suggested by the SCR router.
• Other users / receivers connected to the
system may be affected if the specified
user band number and frequency are
changed during installation.
• User band and User band frequency are
specified on the SCR router used; and
each user / receiver must select a spe-
cified user band and user band fre-
quency.
• With SCR satellite system, auto search by
several users / receivers at the same
time may cause problems.
26.Press
to return to the previous menu,
press
to return to TV broadcast or
press
to return to Home menu.
20.5 Motorized Antenna Settings
LNB settings described in the fol-
lowing section require significant
expertise on satellite systems. Con-
tact an expert about the subject.
Your TV supports DiSEqC 1.2 motorized
satellite systems. With this feature, you can
control the satellite on your television.
Adjust the satellite antenna position for
each satellite. By storing these settings, the
antenna can be moved to a previously
saved location when needed.
1. Press the
to switch to the TV mode.
2. Press the
, select Source and press
the
.
3. Select Satellite option, and press the
.
4. Press the
the
.
5. Select Channels & Inputs option, and
press
6. Select Channels option, and press the
.
ð Channel menu will be displayed.
7. Select Satellite option, and press the
8. Select Channel Installation Mode op-
tion, and press the
9. Select Satellite (Standard) or Satellite
(Operator Mode) if you are using an op-
erator, and press the
10.Press the
menu.
11.Select Channels option, and press the
.
12.Select Automatic Channel Scan op-
tion, and press the
ð A warning message will be displayed.
13.Select Other option, and press
Automatic Channel
Scan
Next
Other
.
14.Select DiSEqC 1.2 and press the
EN / 98
, select Settings and press
.
.
.
to return to the previous
.
.
.
.
Advertisement
Table of Contents
