Table of Contents
Advertisement
3.2 Installation or Hanging
Select a location so that no direct sunlight
falls on the screen.
3.2.1 Installation with Stand
• To mount the stand, refer to the installa-
tion instructions included.
• Place the TV set on a hard, level surface.
3.2.2 Preparation for Installation
with a VESA Installation Kit
Contact authorized dealer to purchase the
installation kit.
You will need:
• A pair of scissors,
• A cross-tip screwdriver.
Follow the installation instructions for the
VESA installation kit.
1. Place the TV in the film on a smooth
surface with the screen facing down.
2. Cut open the film on the back side using
the scissors.
3. Connect the required cables to the con-
nectors on the TV. Refer to the "Con-
necting the antenna and the power cord"
[} 19] section in this manual.
4. Tie the cables so they do not hang down
onto the floor.
5. Screw the VESA installation kit onto the
television and mount it according to its
installation instructions.
3.3 Inserting Batteries into the Re-
mote Control
1.
Open the battery compartment.
2.
Insert batteries as marked on the bot-
tom of the battery compartment (2 ×
Alkaline/LR03/AAA).
3.
Close the battery compartment.
Notes:
• If the television no longer reacts properly
to remote control commands, the batter-
ies may be flat. Never keep flat batteries
inside the battery compartment.
• The manufacturer accepts no liability for
damage resulting from used batteries.
• Batteries, including those which contain
no heavy metal, must not be disposed of
with household waste. Please dispose of
used batteries in an environmentally
sound manner. Find out about the legal
regulations which apply in your area.
EN / 16
Advertisement
Table of Contents
