8 O&M on WEB
8.4.6 Setting Operation Parameters
Step 1 Click "Device Monitoring" in the left navigation bar.
Step 2 Select a device in the left device list in the function display area. Click "Operation Parame-
ters" on the right. enter a value in "Current Value", and then click "Settings"
Click "Configure Synchronization"to synchronize the settings to other devices
of the same type.
- - End
8.4.7 Setting Protection Parameters
Step 1 Click "Monitoring" in the left navigation bar.
Step 2 Select a device in the left device list in the function display area. Click "Protection Parame-
ters" on the right. enter a value in "Current Value", and then click "Settings"
Click "Configure Synchronization"to synchronize the settings to other devices
of the same type
- - End
8.5
Modifying Password
PC
Click
in the upper-right corner of the interface, select Modify Password, enter the origi-
nal password and new password, and click Save.
Mobile Device
Through the PC interface, select System → WLAN → Password, delete the original pass-
word, and enter the new password, click Save to complete the password modification.
The password should be a combination of 6 to 32 letters and digits.
Reconnect and log in after password change.
8.6
Logout
To protect the account security, it is recommended to log out in time after the operation is
completed.
Exit Method
Click
and select Logout in the upper right corner of any interface.
62
System Manual