Advertisement
Table of Contents
Arm Pin Kit
Groundsmaster
With Serial Number up to 315000001
Model No. 111-8010
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Wear plate
Arm pin
Carriage bolt
Hex nut (M10)
Hex nut (M24)
Washer (M24)
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
3400 4-Wheel Drive Traction Unit
Qty.
2
2
4
Install the lift kit.
4
2
2
Register at www.Toro.com.
Form No. 3395-628 Rev A
Installation Instructions
Use
Original Instructions (EN)
All Rights Reserved *3395-628* A
Printed in the UK
Advertisement
Table of Contents
Related Manuals for Toro 111-8010
Summary of Contents for Toro 111-8010
- Page 1 Form No. 3395-628 Rev A Arm Pin Kit Groundsmaster ® 3400 4-Wheel Drive Traction Unit With Serial Number up to 315000001 Model No. 111-8010 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty.
- Page 2 Before installing the kit, read and understand the safety precautions in the GM3400 Operator Manual. If you have any doubts on the installation procedure, consult your local authorised dealer. 1. Position the machine on a level surface, lower the cutting deck, engage the parking break, ensure that the traction pedal is in the Neutral position and the PTO lever in the O position, stop the engine, and remove...
Need help?
Do you have a question about the 111-8010 and is the answer not in the manual?
Questions and answers