2.8 Jumper Settings
How Jumpers Work
To modify the operation of the motherboard, jumpers can
be used to choose between optional settings. Jumpers
create shorts between two pins to change the function of the
connector. Pin 1 is identified with a square solder pad on the
printed circuit board. See the diagram below for an example of
closing Pin 1 and Pin 2 of the jumper. Refer to the motherboard
layout page for jumper locations.
Note: On two-pin jumpers, "Closed" means the jumper
is on and "Open" means the jumper is off the pins.
83
Chapter 2: Installation
3
2
1
Connector
Pins
Jumper
3
2
1
Setting