Table of Contents
Advertisement
Super X13DDW-A User's Manual
IPv6 HTTP Support (Available when "Network Stack" is set to Enabled)
Select Enabled to enable IPv6 HTTP boot support. If this feature is disabled, it will not create
the IPv6 HTTP boot option. The options are Disabled and Enabled.
PXE Boot Wait Time (Available when "Network Stack" is set to Enabled)
Use this feature to set the wait time (in seconds) upon which the system BIOS will wait for
you to press the <ESC> key to abort PXE boot instead of proceeding with PXE boot by
connecting to a network server immediately. Press "+" or "-" on your keyboard to change the
value. The default setting is 0.
Media Detect Count
Use this feature to select the wait time (in seconds) for the BIOS ROM to detect the presence
of a LAN media either via the Internet connection or via a LAN port. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
MAC:(MAC address)-IPv6 Network Configuration
Note: The display for this section will differ, depending on your system configuration.
Enter Configuration Menu
The following information is displayed:
•
Interface Name
•
Interface Type
•
MAC address
•
Host address
•
Route Table
•
Gateway addresses
•
DNS addresses
Interface ID
Use this feature to change/enter the 64-bit alternative interface ID for the device. The string
format is colon separated. The default setting is the MAC address above.
DAD Transmit Count
This feature displays the number of times that Duplicate Address Detection (DAD) has been
performed. DAD is a procedure used to verify whether an IPv6 address is unique on the
136
Advertisement
Table of Contents
