Supermicro X13DDW-A User Manual page 44

Super X13DDW-A User's Manual
Removing the PHM from the CPU Socket
Before removing the PHM from the motherboard, be sure to shut down the system and unplug
the power cables from the power supply. Then follow the steps below:
1. Use a T30 driver to loosen the four PEEK nuts on the heatsink in the sequence of A, B,
C, and D.
B
B
D
D
C
C
A
A
1U Heatsink 2U Heatsink
2. Once the PEEK nuts are loosened from the CPU socket, press the rotating wires
inwards to unlatch the PHM from the socket as shown in the drawings below.
Unlatched State
1U Heatsink
Unlatched State
2U Heatsink
44