Supermicro X13DDW-A User Manual page 140

Super X13DDW-A User's Manual
Note 2: The option of Legacy is available when "Boot Mode Select" is set to Dual or
Legacy.
Note 3: Refer to Boot submenu in the BIOS Setup main menu to set "Boot Mode
Select".
Onboard Video Option ROM
Select EFI to allow you to boot the computer using the Extensible Firmware Interface (EFI)
device installed on the onboard video port. The options are Disabled and EFI.
RSC-D-6G5 PCIe 5.0 X16 OPROM / RSC-DR-6G5 PCIe 5.0 X16 OPROM / P1-AIOM
OPROM / P2-AIOM OPROM / M.2-C1 OPROM / M.2-C2 OPROM
Select EFI to allow you to boot the computer using the EFI device installed on the PCIe slot
specified. The options are Disabled and EFI.
Onboard NVMe1 Option ROM ~ Onboard NVMe2 Option ROM (Available when NVMe
devices are detected by the BIOS)
Use this feature to select which firmware function to be loaded for the NVMe device in this
slot. The options are Disabled and EFI.
HTTP Boot Configuration

HTTP Boot Policy
Use this feature to set the HTTP boot policy. The options are Apply to all LANs, Apply to
each LAN, and Boot Priority #1 instantly.
HTTPS Boot Checks Hostname
Enable this feature for HTTPS boot to check the hostname of the TLS certificates to see if it
matches the host name provided by the remote server. The options are Enabled and Disabled
(WARNING: Security Risk!!).
Priority of HTTP Boot
Instance of Priority 1: (Available when your motherboard supports this feature)
This feature sets the rank target port. The default setting is 1.
Select IPv4 or IPv6
This feature specifies which connection the target LAN port should boot from. The options
are IPv4 and IPv6.
Boot Description
Use this feature to enter a boot description, which cannot be longer than 75 characters. Please
be sure to enter a boot description; otherwise, the boot option for the URI cannot be created.
140