Supermicro X13DDW-A User Manual page 150

Super X13DDW-A User's Manual
All PMem Dimms Master Security Policy
Master Security Policy
Use this feature to set the User Master Policy. The options are Do Nothing and Master
Security Erase Dimms.
All PMem Dimms Fw Settings
Updated PMem DIMMs FW version::
The updated PMem DIMMs firmware (FW) version is displayed.
Update PMem DIMMs FW from BIOS
Select Enabled to update PMem DIMM firmware from the BIOS. The options are Disabled
and Enabled.
Last Status :: (Update Fw) (Success) Code
This feature displays the activitng PMem Last status.
Intel(R) Optane(TM) Persistent Memory Configuration (Available
when any PMem module is detected by the BIOS)
Note: This submenu depends on the support of Intel Optane PMem 300 Series.
The following information is displayed:
•
Version: This feature displays the version of PMem used in the system.
•
Select an action below.
•
Detected PMem modules: This feature displays the number of PMem modules detected
by the system.
•
All PMem modules are healthy.
Note: The following sections, which describe the status of PMem, are for your refer-
ence only. The number and the status of PMem displayed on your BIOS screen will
vary, depending on the PMem modules connected to the system.
PMem modules
This feature allows you to view and configure the following settings for the PMem modules
installed in the system.
PMem modules on Socket 0x000:
150