Supermicro X13DDW-A User Manual page 178

Super X13DDW-A User's Manual
•
Security Frozen:
•
HDD User Pwd Status:
•
HDD Master Pwd Status:
Set User Password (Available when "Security Frozen:" above is No)
Use this feature to set the SATA user password which allows you to configure the Supermicro
Security Erase settings by using the SATA user password.
Warning!! Be sure to enter the correct password for a device. If an incorrect
password is entered, this device will be locked. If this happens, reboot the sys-
tem and re-enter the correct password. A locked HDD will remain locked until the
correct password for the device is entered!! Be sure to keep all your passwords
in a safe and secure place.
Secure Boot
Note: For detailed instructions on how to configure Security Boot settings, please refer
to the Security Boot Configuration User's Guide posted on the web page under the
link: https://www.supermicro.com/support/manuals/.
The following information is displayed:
•
System Mode
•
Vendor Keys
•
Secure Boot
Secure Boot
Select Enabled to configure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CSM (Compatibility Support Module) Support
Select Enabled for CSM support, which will allow for system boot from a legacy device. Please
make sure that your device is compatible with legacy boot before disabling CSM support.
The options are Disabled and Enabled.
178