(FLC) feature have SGXLEPUBKEYHASH, which contains the hash of the public key for the
SGX Launch Enclave (LE) to be signed with.
SGXLEPUBKEYHASH0 (Available when both "SW Guard Extensions (SGX)" and
"SGXLEPUBKEYHASHx Write Enable" are set to Enabled)
Use this feature to enter the bytes 0-7 of SGX Launch Enclave Public Key Hash.
SGXLEPUBKEYHASH1 (Available when both "SW Guard Extensions (SGX)" and
"SGXLEPUBKEYHASHx Write Enable" are set to Enabled)
Use this feature to enter the bytes 8-15 of SGX Launch Enclave Public Key Hash.
SGXLEPUBKEYHASH2 (Available when both "SW Guard Extensions (SGX)" and
"SGXLEPUBKEYHASHx Write Enable" are set to Enabled)
Use this feature to enter the bytes 16-23 of SGX Launch Enclave Public Key Hash.
SGXLEPUBKEYHASH3 (Available when both "SW Guard Extensions (SGX)" and
"SGXLEPUBKEYHASHx Write Enable" are set to Enabled)
Use this feature to enter the bytes 24-31 of SGX Launch Enclave Public Key Hash.
SGX Auto MP Registration (Available when "SW Guard Extensions (SGX)" is set to
Enabled)
Use this feature to enable/disable SGX Auto Multi-Package Registration Agent (MPA) running
automatically at boot time. The options are Disabled and Enabled.
Chipset Configuration
Warning: Setting wrong values in the following features may cause the system to
malfunction.
North Bridge
This feature allows you to configure the following North Bridge settings.
Uncore Configuration
The following information will be displayed.
•
Number of CPU
•
Current UPI Link Speed
•
Current UPI Link Frequency
•
Global MMIO Low Base / Limit
111
Chapter 4: UEFI BIOS