Table of Contents
Advertisement
Power On and BMC/BIOS Status LED Button
The Power On and BMC/BIOS Status LED button is located on Pin 1 of the front control panel
header located at JFP1. Momentarily contacting Pin 1 of JFP1 will power on/off the system
or display BMC/BIOS status. Refer to the table below for more information.
Green: solid on
BMC/BIOS blinking green at 4Hz
BIOS blinking gree at 4Hz
BMC blinking red x2 (2 blinks red) at 4Hz, 1 pause at 2Hz (on-on-off-off)
BMC/BIOS blinking green at 1Hz
Front UID Button
The Front UID button is located on Pin 2 of JFP1, which is used in conjunction with the Front
UID Button Select jumper located at JRU1. To set Pin 2 of JFP1 for use as the Front UID
button, close Pin 2 and Pin 3 of Jumper JRU1 (Default). Please refer to the jumper section
for more information. Also see the layout below for the location of JRU1.
X13DDW_JFP1
1
1
Power Button
2
UID Button
2
3
UID LED_N
4
Fail LED_N (OH/FF/PF)
5
LAN-2 Activity LED
6
LAN-1 Activity LED (Aggregate all LAN)
7
HDD Acitivity LED
8
Standby LED_N
Power/RoT LED_N
9
10
P3V3_STBY
11
Ground
12
I2C Data
13
I2C Clock
14
Ground
Power Fail LED_P
15
16
P5V_USB
P5V_USB
17
18
P5V_USB
19
Power Fail LED_N
20
Ground
Power Button
BMC/BIOS Status LED Indicator
Status
Power and Front UID Button Select Jumper (JRU1)
State
Close Pin 2 and Pin 3 of JRU1 Pin 2 of JFP1: used as a front UID (Default)
3
COM1
USB2/3 (3.0)
JUIDB1
C
JRU1
IPMI_LAN
BMC
PCH
MH10
JPCIE1
JAIOM1
JS2
P1-AIOM PCIe 5.0x16
JS1
JBT1
JPCIE2
JBT1
JNCSI1
MAC CODE
LED4
M.2-C1
BAR CODE
2
BATTERY
(NVME)
CPU1
JL1
JNVME1
1
67
Chapter 2: Installation
Event
System power on
BMC/BIOS checking
BIOS recovery/update in progress
BMC recovery/update in progress
Flash not detected or golden image
checking failure
Jumper Settings
Description
1. Power On Button
2. UID Button Connection
3. JRU1
VGA
JVGA1
4
CPLD
JSTBY1
MH11
JAIOM2
JF1
P2-AIOM PCIe 5.0x16
LEDPWR
X13DDW-A
J35
R1.01
M.2-C2
C
(NVME)
1
1
CPU2
8
JNVME7
JNVME5
JNVME8
Advertisement
Table of Contents
