Table of Contents
Advertisement
CPU P State Control
This feature allows you to configure the following CPU power settings:
AVX P1 (Available when "SpeedStep (P-States)" is set to Enable)
Use this feature to set the appropriate TDP level for the system. The Intel Advanced Vector
Extensions (Intel AVX) P1 feature allows the user to set the base P1 ratio for Streaming
SIMD Extensions (SSE) and AVX workloads. Each P1 ratio has the corresponding AVX
Impressed Current Cathodic Protection (ICCP) pre-grant license level, which refers to
the selection between different AVX ICCP transition levels. The options are Nominal,
Level 1, and Level 2.
Intel SST-PP (Available when "SpeedStep (P-States)" is set to Enable and
"Dynamic SST-PP" is set to Disable)
This feature allows the user to choose from two additional Base-Frequency conditions
maximum for CPU P State Control. The options are Auto, Level 0, Level 3, and Level 4.
(SST-PP is the abbreviation for Speed Select Technology-Performance Profile.)
Dynamic SST-PP (Available when "SpeedStep (P-States)" is set to Enable and
when your CPU supports the Intel Speed Select function)
If this feature is set to Enable, it allows the user to configure Intel SST-PP features,
including Base, Configuration 3, and Configuration 4 settings under various processor
working conditions. The options are Disable and Enable.
The following items will be displayed when "SpeedStep (P-States)" is set to Enable.
Please note that the value (Reading) for each item displayed on the screen will differ,
which is based on your system configuration.
•
SST-PP Level
•
Capable
•
Core Count
•
P1 Ration
•
Package TDP (W)
•
DTS_Max
91
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
