Super X13DET-B User's Manual
Intel(R) Ethernet Controller (Ethernet controller) -(MAC address)
Note: This feature is available when "Onboard LAN Option ROM Type" is set to EFI.
The Ethernet controller and MAC addresses shown above depend on system features.
Firmware Image Properties (Available when related devices are
detected by the BIOS)
The following information is displayed:
•
Option ROM Version
•
Unique NVM/EEPROM ID
•
NVM Version
NIC Configuration
Link Speed
Use this feature to set the connection speed of a LAN port specified. The options are Auto
Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On LAN
If this feature is set to Enabled, the LAN port specified will be enabled when the system is
powered on. The options are Disabled and Enabled.
Blink LEDs
This feature identifies the physical network port by blinking the associated LED. The default
setting is 0 (up to 15 seconds).
The following information is displayed:
•
UEFI Driver
•
Adapter PBA
•
Device Name
•
Chip Type
•
PCI Device ID
•
PCI Address
•
Link Status
138