BIOS
•
AMI SPI BIOS
•
EFI GUI, SPI dual/quad speed control, riser card auto-detection, IPMIView, SMCIPMITOOL, IPMI CFG, Redundant power
supply unit detection, SSM and SUM-OOB/InBand support
Power Management
•
ACPI power management
•
Power button override mechanism
•
Power-on mode for AC power recovery
•
Wake-on-LAN
•
Power-on mode for AC power recovery
System Health Monitoring
•
Onboard voltage monitoring for +12V, +5V/+5V standby, +3.3V, +3.3V standby, Vcore and Vmem
•
Onboard temperature monitoring for CPU, VRM, LAN, PCH, system and memory
•
8+4 CPU switch phase voltage regulator
•
CPU thermal trip support
•
Platform Environment Control Interface (PECI)/TSI
Fan Control
•
Fan status monitoring via BMC connections
•
Single cooling zone
•
Low-noise fan speed control
System Management
•
Chassis intrusion header and detection
•
Server platform service
Firmware Integrity/System Security
•
TPM (Trusted Platform Module) support (Note 3 below)
•
Boot Guard
•
BMC recovery, BIOS recovery, CPLD recovery
•
RoT (Root of Trust) 2.0 support to protect firmware security by detecting critical data corruption and restoring platform
integrity
LED Indicators
•
Power LED
•
UID/remote UID
•
LAN activity LED
•
BMC/CPLD firmware LED
Dimensions
•
7.62" (W) x 18.80" (L) Big Twin (193.55 mm x 477.52 mm)
Note 1: The CPU maximum Thermal Design Power (TDP) is subject to motherboard,
chassis, and heatsink cooling restrictions. For proper thermal management, please
check the chassis and heatsink specifications.
Note 2: For BMC configuration instructions, please refer to the Embedded BMC Con-
figuration User's Guide available at https://www.supermicro.com/support/manuals/.
15
Chapter 1: Introduction