Table of Contents
Advertisement
Media Detect Count
Use this feature to select the wait time (in seconds) for the BIOS ROM to detect the presence
of a LAN media either via the Internet connection or via a LAN port. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
MAC:(MAC address)-IPv6 Network Configuration
Enter Configuration Menu
The following information is displayed:
Interface Name / Interface Type / MAC address / Host address / Route Table / Gateway
addresses / DNS addresses
Interface ID
Use this feature to change/enter the 64-bit alternative interface ID for the device. The
string format is colon separated. The default setting is the MAC address above.
DAD Transmit Count
This feature displays the number of consecutive neighbor solicitation messages that
has been sent while performing duplicate address detection on a tentative address. The
default setting is 1.
Policy
Use this feature to select how the policy is to be configured. The options are automatic
and manual.
Advanced Configuration (Available when "Policy" is set to manual)
New IPv6 address
Use this feature to enter the IPv6 address for the local machine.
New Gateway address
Use this feature to set the gateway address for the local machine.
New DNS address
Use this feature to set the DNS server address for the local machine.
Commit Changes and Exit
Press <Enter> to save changes and exit. The options are Yes and No.
125
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
