Table of Contents
Advertisement
Super X13DET-B User's Manual
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy
support if there are no legacy USB devices present. Select Disabled to have all USB
devices available for EFI applications only. The options are Enabled, Disabled, and Auto.
XHCI Hand-off
This is a work-around solution for operating systems that do not support Extensible Host
Controller Interface (XHCI) hand-off. The XHCI ownership change should be claimed by
the XHCI driver. The options are Enabled and Disabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which in turn, provides complete
legacy USB keyboard support for the operating systems that do not support legacy USB
devices. The options are Disabled and Enabled.
PCIe PLL SSC
Select Enabled for PCH PCIe Spread Spectrum Clocking (SSC) support, which allows the
BIOS to monitor and attempt to reduce the level of electromagnetic interference caused by
the components whenever needed. The options are Disabled and Enabled.
Server ME Information
The following information is displayed:
•
General ME Configuration
•
Oper. Firmware Version
•
Current State
•
Error Code
PCH SATA0 Configuration /
SATA2 Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the
SATA devices that are supported by the Intel PCH chip and displays the following features.
SATA Controller(s)
This feature enables or disables the onboard SATA controller(s) supported by the Intel PCH
chip. The options are Disabled and Enabled.
SATA Mode Selection (Available when "SATA Controller(s)" is set to Enabled)
Use this feature to select the mode of installed SATA drives. The options are AHCI and RAID.
PCH SATA1 Configuration /
114
PCH
Advertisement
Table of Contents
