Supermicro X13DET-B User Manual page 13

SATA 0~7 (SATA1)
SATA 8~11 (SATA2)
UID Button (JUIDB1)
USB0/1 (3.0) (JUSB1)
VGA (JVGA1)
VROC RAID Key (JRK1)
Note 1: For details on how to configure Network Interface Card (NIC) settings, please
refer to the Network Interface Card Configuration User's Guide posted on our website
under the link:
Note 2: For detailed instructions on how to configure VROC RAID settings, please
refer to the VROC RAID Configuration User's Guide posted on the web page under
the link: https://www.supermicro.com/support/manuals/.
SATA connector with support of eight Intel
RAID 1, RAID 5, and RAID 10 supported)
SATA connector with four SATA connections (SATA 8~11)
Unit Identifier/BMC Reset switch/button on the rear I/O panel
USB 3.0 connector on the rear I/O panel for two USB parts (Port0/Port1)
Rear VGA connector
Intel VROC RAID key header for NVMe RAID support (See Note 2 below.)
https://www.supermicro.com/support/manuals/.
13
Chapter 1: Introduction
PCH SATA 3.0 connections (RAID 0,
®