Supermicro X13DET-B User Manual page 89

Note 2: Refer to the submenu of Security > Supermicro Security Erase Configuration
to set "Lockdown Mode".
Rear USB Port(s) (Available when "Lockdown Mode" is set to Enabled with the
DCMS key)
Select Enabled to allow the specific type of USB devices to be used in the rear USB ports.
Select Enabled (Dynamic) to allow or disallow this particular type of USB devices to be used
in the rear USB ports without rebooting the system. The options are Enabled, Disabled, and
Enabled (Dynamic).
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay Off, Power On, and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4 Seconds Override to power off the system after pressing and holding the power button for
four seconds or longer. Select Instant Off to instantly power off the system as soon as the
user presses the power button. The options are Instant Off and 4 Seconds Override.
CPU Configuration

Warning: Setting the wrong values for the features included in the following sections
may cause the system to malfunction.
Processor Configuration
The following CPU information will be displayed:
•
Processor BSP Revision
•
Processor Socket
•
Processor ID
•
Processor Frequency
•
Processor Max Ratio
•
Processor Min Ratio
•
Microcode Revision
•
L1 Cache RAM (Per Core)
89
Chapter 4: UEFI BIOS