Table of Contents
Advertisement
4.4 Event Logs
Use this menu to configure Event Log settings.
Note: After you've made any changes in this section, reboot the system for the changes
to take effect.
Change SMBIOS Event Log Settings
Enabling/Disabling Options
SMBIOS Event Log
Select Enabled to enable System Management BIOS (SMBIOS) Event Logging during system
boot. The options are Disabled and Enabled.
Erasing Settings
Erase Event Log (Available when "SMBIOS Event Log" is set to Enabled)
Select "No" to keep the event log without erasing it upon next system bootup. Select "Yes,
Next Reset" to erase the event log upon next system reboot. The options are "No", "Yes,
Next reset", and "Yes, Every reset."
95
Chapter 4: BIOS
Advertisement
Table of Contents
