Saving The Parameterisation Data - Vega VEGASON S 62 Operating Instructions Manual

Service
Basic adjustment
Display
Diagnostics
Service
Info
False signal suppression 4.1
Change now?
Reset 4.5
Select reset?
PIN 4.10
Enable?
Info
Basic adjustment
Display
Diagnostics
Service
Info
Instrument type 5.1
VEGASON 6x
Serial number
12345678
5.6 Saving the parameterisation
data
We recommended writing down the adjustment
data, e.g. in this operating instructions manual,
and archiving them afterwards. They are thus
available for multiple use or service purposes.
If VEGASON S 62 is equipped with a display
and adjustment module, the most important
VEGASON S 62 •
4
Extended setting
none
Unit of measurement
m(d)
select?
5
Date of manufacture
7. July 2006
Software version
3.32
5 Set up with the display and adjustment module
4.2 Current output
Output mode: 4-20 mA
Failure mode < 3.6 mA
min. curr. 3.8 mA
4.6 Language
German
5.2 Last change using PC
7. July 2006
data can be read out of the sensor into the dis-
play and adjustment module. The procedure is
described in the operating instructions manual
"Display and adjustment module" in the menu
item "Copy sensor data". The data remain there
permanently even if the sensor power supply
fails.
If it is necessary to exchange the VEGASON
S 62, the display and adjustment module is in-
4.3 Simulation
Start simulation?
4.7 Copy sensor data
Copy sensor data?
5.3 Sensor characteristics
Display now?
4.4
4.9
5.4
31