Dismount; Dismounting Steps; Disposal - Vega VEGASON S 62 Operating Instructions Manual

Error messages via the display and adjust-
ment module
Fehlercode Ursache
E013 no measured
value available
E017 Adjustment span
too small
E036 no operable sen-
sor software
E041 Hardware error,
electronics de-
fective
8

Dismount

8.1

Dismounting steps

Warning:
Before dismounting, be aware of dan-
gerous process conditions such as e.g.
pressure in the vessel, high temperatu-
res, corrosive or toxic products etc.
Take note of chapters "Mounting" and "Connec-
ting to voltage supply" and carry out the listed
steps in reverse order.
8.2

Disposal

Pass the instrument on to a specialised recy-
cling company and do not use the municipal
collecting points.
Remove any batteries in advance, if they can be
removed from the device, and dispose of them
separately.
If personal data is stored on the old device to be
disposed of, delete it before disposal.
VEGASON S 62 •
Beseitigung
Sensor in boot phase
Sensor does not find an echo, e.g. due to faulty installation or
wrong parameter adjustment
Carry out a fresh adjustment and increase the distance between
min. and max. adjustment
Carry out a software update or send instrument for repair
Exchange the instrument or send it in for repair
If you have no way to dispose of the old instru-
ment properly, please contact us concerning
return and disposal.
8 Dismount
33