Table of Contents
Advertisement
Appendices
T (The clock–/TEMP folder detected)
The clock battery voltage is low. Please
replace the battery, and set the date and
time in MEDIA mode
Meaning: The battery for the clock/calendar function has
run low, and needs to be replaced. Your Korg Distributor can
help you find a service center to replace the battery.
The data on the medium will be lost.
Meaning: When you format a disk, all of the data on the
disk will be erased. Make sure that you have any data backed
up before proceeding! To proceed with formatting the media,
press OK.
There is no readable data
Meaning: Either the file size is 0 or the file does not contain
data that can be accessed by the load or open operation.
Alternatively, the data is damaged etc., and cannot be loaded
or accessed.
This file is already loaded
Meaning: When loading a divided .PCG file, you attempted
to load a file that had already been loaded.
• Load the .PCG files that have not yet been loaded.
U (Unable to create directory–USB Hub)
Unable to create directory
Meaning: You attempted to create a directory that would
exceed the maximum path length of 76 characters. The path
includes the names of the directory and all its parent
directories up to the root level of the disk.
• Rename the directories using shorter names, so that the
file path fits within 76 characters.
Unable to save file
Meaning: When saving a file in MEDIA mode, using the
Copy command in MEDIA mode, or sampling to drive as a
WAVE file, the resulting file path exceeded 76 characters.
To solve this problem:
• Rename the file and/or directories using shorter names,
so that the file path fits within 76 characters. The file
path includes the file name and the names of all parent
directories up to the root level of the drive.
252
This file was created on KRONOS.
The sound data is different between
NAUTILUS and KRONOS.
Remap KRONOS data to function on
NAUTILUS?
Meaning: Simply loading a PCG file doesn't guarantee that
you'll hear the correct sounds. This is because the programs
and wave sequences for the KRONOS PCG file and for the
NAUTILUS are arranged differently.
Are You Sure?
• Press "Yes" in the dialog box to automatically correct the
/TEMP folder detected.
This folder may contain unsaved WAVE
files from a previous audio track
recording session.
Do you want to restore the /TEMP folder,
or delete it from the disk?
Meaning: The WAVE files created when you recorded audio
tracks before powering-off were not saved as song data, and
remain in the TEMP folder of the internal disk. Since the
data was not saved as song data, all audio events and region
data were deleted, but if necessary you can save these WAVE
files and use them to create a new song.
• If you want to keep this data, press Restore. If you want
Meaning: When using the Copy command in MEDIA
mode, not enough temporary storage space was available.
USB HUB Power exceeded
Meaning: The power consumption of your USB devices has
exceeded the capacity of the hub to which they are
connected. The USB hub will not be recognized correctly in
this state. To solve this problem:
• If you're using a USB hub or device that is capable of
• If you are using more than one USB hub, try connecting
references for the sounds so that they play correctly.
If you press "No", the references are not converted; and
when "Load All" is executed, the corresponding banks
will be overwritten.
For more information, see "Loading KRONOS .PCG
files" on page 707 of the PG.
to delete this data, press Delete.
Please disconnect USB device
being self-powered, use it in self-powered mode.
the device to a different USB hub.
[Restore] [Delete]
Advertisement
Table of Contents
