Table of Contents
Advertisement
Arpeggiator function
Synchronization with Songs
• When you press the SEQUENCER START/STOP
button, the Drum Track will stop along with the
sequencer.
• If you want the Drum Track to start simultaneously with
the beginning of recording, press the DRUM button
during the pre-count before recording (if Trigger Mode
is Start Immediately) or play the keyboard (if Trigger
Mode is Wait KBD Trig). The Drum Tracks will not be
triggered immediately, but will be triggered in
synchronization with the sequencer the moment
recording starts.
Slave operation
Connect the NAUTILUS's MIDI IN to your external MIDI
device's MIDI OUT, or connect the NAUTILUS's USB B
connector to your computer's USB port. Then, set up the
NAUTILUS as described under "MIDI Clock
synchronization" on page 174.
Synchronization with MIDI real-time commands
In SEQUENCER mode, Song Start, Continue, and Stop
messages that the NAUTILUS receives will control song
playback and recording just as when you operate the
SEQUENCER START/STOP button. Arpeggiator also will
be controlled in the same way as when you operate the ARP
button. (See "Synchronization with Songs," above.)
Master operation
Connect the NAUTILUS's MIDI IN to your external MIDI
device's MIDI OUT, or connect the NAUTILUS's USB B
connector to your computer's USB port.
Set the Global MIDI Clock to Internal. The connected
external MIDI device will synchronize to the MIDI real-time
clock and real-time commands it receives.
Note: You can also use MIDI Clock=Auto MIDI or Auto
USB, as long as clock messages are not being received. For
details, please see "MIDI Clock synchronization" on
page 174.
Synchronization via MIDI clock
The connected external MIDI device will synchronize to the
MIDI clock of the NAUTILUS.
168
Synchronizing the step sequencer
The step sequencer will play in synchronization with the
internal/external MIDI clock.
Synchronization with the arpeggiator
The step sequencer will synchronize to the timing of the
currently playing arpeggiator.
Note: If you want to synchronize the arpeggiator playback to
the step sequencer that's currently running, turn Key Sync
off.
Synchronization between the step sequencer
and the sequencer in SEQUENCER mode
When playing or recording a song
• The step sequencer will synchronize to the song in units
of one beat.
Synchronization with song start
• If the step sequencer is on and running, it will reset to the
beginning of the pattern when it receives a song start
message.
Synchronization with the playback of an
external sequencer
If " (Tempo)" is EXT in PROGRAM, COMBINATION, or
SEQUENCER modes, the step sequencer will synchronize
to MIDI timing clock and start messages from an external
MIDI sequencer etc. connected via a MIDI cable.
Note: The step sequencer will also synchronize in the same
way if MIDI Clock is set to Auto and MIDI timing clock
messages are being received from a connected MIDI device.
Synchronization with external MIDI timing clock
The step sequencer will synchronize to " (Tempo)" based on
the external MIDI timing clock.
Synchronization with the MIDI realtime command
Start message
If the step sequencer is on and running, it will be reset to the
beginning of the pattern when it receives the Start command.
Advertisement
Table of Contents
