Table of Contents
Advertisement
K
NAUTILUS system version ... update
complete.
Please restart the system.
Meaning: This message will appear when you've used the
GLOBAL > Basic Setup– Basic page Page Menu Command
Update System Software, after the update is complete.
Restart the system to use the updated software.
• Turn the power button off, and then on again.
M (Master–Multisample)
Master Track can't be recorded alone
Meaning: When real-time-recording a single track, you
attempted to begin recording with the master track as the
current track.
• Select a MIDI or Audio Track for recording, instead of
the Master Track.
Master Track is empty
Meaning: You cannot open Audio Event Edit because the
Master Track is empty. To solve this problem:
• Execute the SEQUENCER– Track Edit page menu
command Set Song Length etc. with an appropriate
length to create a master track, and then open Audio
Event Edit.
Measure number over limit
Meaning: The attempted edit operation would cause the
track length to exceed 999 measures.
• Delete unnecessary measures.
Measure size over limit
Meaning: When loading a Standard MIDI File, the number
of events in a measure exceeded the maximum
(approximately 65,535 events).
Meaning: The attempted edit operation would cause the
maximum number of events in a measure (approximately
65,535) to be exceeded.
To solve either of these problems:
• Use event editing etc. to delete unwanted data.
Medium changed
Meaning: When executing the Copy command in the
MEDIA mode Utility page, the media was exchanged or
ejected, and it was not possible to copy between separate
media on the same drive.
Medium unavailable
Meaning: You selected a medium that does not allow
writing.
Error and confirmation messages K
Medium write protected
Meaning: The other writing-destination media is write-
protected.
• Turn off write protect on the other media, and execute
the command once again.
Memory full
Meaning: In SEQUENCER mode when editing a song,
track or pattern, the total data of all songs has used up all of
the sequence data memory, and further editing is not
possible. To solve this problem:
• Delete other song data etc. to increase the amount of free
memory.
Meaning: While real-time recording in SEQUENCER
mode, there is no more free memory to accommodate the
recorded data, so recording has been forcibly halted. To
solve this problem:
• Delete other song data etc. to increase the amount of free
memory.
Memory overflow
Meaning: While receiving exclusive data in MEDIA mode
Save Exclusive, all remaining internal memory was used up.
To solve this problem:
• If you are receiving two or more sets of exclusive data,
transmit them separately to the NAUTILUS.
Meaning: In MEDIA mode, you attempted to load more
sample waveform data than there was free memory capacity.
To solve this problem:
• In SAMPLING mode, execute Delete sample to create
free space in the sample waveform data area, and re-load
the data.
Memory Protected
Meaning: The internal program, combination, song, set list,
drum kit, wave sequence, Arpeggio pattern, or Internal HDD
Save is protected.
• In GLOBAL mode, turn off write-protect, and execute
the write or load operation once again.
247
Advertisement
Table of Contents
