Panel Alarm & Fault Displays - EMS FIRE SYSTEM 5000 User Manual

E.M.S Group
16.0 Panel Alarm & Fault Displays
The following section contains useful information regarding screen shots and descriptions of alarm and fault conditions and
possible causes. If there is more than one alarm shown the " and ! buttons on the control panel can be used to display each
event.
FIRE
This display shows a fire alarm has been activated from the device shown on the controller. The following alarm screen will be
shown;
Indicates the alarm
type and number.
Indicates device &
zone allocation
number.
FIRE NETWORK DEVICE
This display shows a fire alarm has been activated from a network device shown on the controller. The following alarm screen
will be shown;
Indicates the alarm
type and number.
Indicates device , →
zone allocation and
network panel number.
PRE-ALARM
This display shows a fire pre-alarm has been activated from the device shown on the controller. The following alarm screen
will be shown;
Indicates the alarm
type and number.
Indicates device &
zone allocation
number.
→
01 FIRE ALARM TOT 01
RADIO CALL POINT
→
ZONE 01
FIRE is displayed on an alarm activation from the device shown on
the display. Fire and Zone LED's will also light and the controllers
Buzzer will sound, when the above screen is displayed.
→
01 FIRE ALARM TOT 01
RADIO CALL POINT
ZONE 01
FIRE is displayed on an alarm activation from the device shown on
the display. Fire and Zone LED's will also light and the controllers
Buzzer will sound, when the above screen is displayed.
→
01 PRE-ALARM TOT 01
RADIO CALL POINT
→
ZONE 01
PRE-ALARM is displayed on a pre- activation from the device
shown on the display. The detector has been caused to activate but
not with sufficient smoke/heat to cause a full Fire alarm event.
Device Fault LED will also light and the controllers buzzer will
sound, when the above screen is displayed.
DEVICE 005
P :04 DEV :005
DEVICE 005
18
System 5000
Indicates the total
number of system
← alarms.
← Shows default or
programmed
device text.
Indicates the total
number of system
← alarms.
← Shows default or
programmed
device text.
Indicates the total
number of system
← alarms.
← Shows default or
programmed
device text.