EMS FIRE SYSTEM 5000 User Manual page 16

E.M.S Group
Enter the device number to be
re- instated (in the example it is device
number 028). Press the YES key. The
display will change to show, figure 60.
Scroll down until "Status ", is
between the > and < characters, as
shown in figure 61.
Press the YES key until the
display changes to show, figure 62.
Scroll down until "Transmit
Event ", is between the > and <
characters, as shown in figure 63.
Press the YES key. The device on the Networked Panel will now be active. Press the NO key until the display shows Panel In
Access. Return the Panel Controls keyswitch to the OFF position, this will now show that the system is clear.
Panel Type : PAN
> Panel
Device
YES = Select
Figure 60
Device
> Status : ISOLATE
Transmit Event
YES = Select
Figure 61
Device
> Status
Transmit Event
YES = Select
Figure 62
Status : ACTIVE
> Transmit Event
^^^^^^^^^^^^^^^^^^^^
YES = Select
Figure 63
15
System 5000
: 04 <
: 028
Time
: 028
<
Time
: 028
: ACTIVE <
Time
<
Time