EMS FIRE SYSTEM 5000 User Manual page 13

E.M.S Group
After a short time period, the display
will change.
This shows the device concerned
is number 28, a call point, allocated to
zone 23 on Network Panel number 04.
Press the 0 key. The display will
change to show, figure 41.
Press the ! key once. The
display will change to show, figure 42.
Press the YES key. The display
will change to show, figure 43.
Press the YES key to increment
the panel number until the required
panel number is shown. In this
example panel 04 should be selected.
The display will change to show, fig 44
Press the! key once until the
display is as shown in , figure 45.
Press the 0 key. The display will
change to show, figure 46.
01 FIRE ALARM TOT 01
RADIO CALLPOINT
ZONE 23 P :04DEV :028
Figure 40
** Fire System
> Dev.Isolate/Test
Net. Isolate/Test
YES=Select
Figure 41
Dev. Isolate/Test
> Net. Isolate/Test
Zone Isolate/Test
YES = Select
Figure 42
Panel Type : PAN
> Panel : 01
Device : 001
YES = Select
Figure 43
Panel Type : PAN
> Panel : 04
Device : 001
YES= Select
Figure 44
Panel : 04
> Device : 001
Status ACTIVE
YES= Select
Figure 45
Enter Device
Numbers 1 - 256)
Number >
YES= Select
Figure 46
12
System 5000
**
<
Time
<
Time
<
Time
<
Time
<
Time
Time