Safety Instructions And Precautions - Salda RIRS EKO 3.0 400 VEL Mounting And Installation Instruction

3. SAFETY INSTRUCTIONS AND PRECAUTIONS

Read these instructions very carefully before installing and using this equipment. Installation, connection and maintenance should be carried out
Main safety rules
Danger
•
parts of the device have stopped.
• Make sure that the fans are not accessible through air ducts or branch openings.
• If any liquids on electric parts or connections that bear voltage are noticed, stop the operation of the device.
•
•
•
Warnings
•
•
•
•
•
• When connecting electricity to the mains, a circuit breaker of suitable size must be used.
Warning!
• If the device is installed in a cold environment, make sure that all connections and tubes are properly isolated. Intake and discharge air
ducts should be isolated in all cases.
• Openings of the ducts should be covered during transportation and installation.
•
Before starting up the device
• Make sure, that there are no strange objects inside the device;
• Manually check fans to make sure they are not stuck or blocked;
• If rotary heat exchanger is installed in the device, make sure that it is not stuck or blocked;
• Check the earthling;
•
4 | EN RIRS 400-700 V EKO 3.0 v2023.1