Possible Faults And Troubleshooting - Salda RIRS EKO 3.0 400 VEL Mounting And Installation Instruction

9. POSSIBLE FAULTS AND TROUBLESHOOTING

FAILURE
Unit is not operating
Air supply heater or pre-heater is not operat-
ing or malfunctioning (if installed)
on the remote control
Rotor is not rotating
Rotor belt failure
22 | EN
CAUSE
No supply voltage
leakage relay is active (if installed by the
installer)
protection
Manual safety device is activated
broken, or its pressure is set improperly.
Rotor belt is broken
Rotor belt is slipping
EXPLANATION/CORRECTIVE ACTIONS
Check if the fans are rotating.
Possible heater or unit failure. MUST contact
elimination.
Filter replacement needed
proper pressure.
Inspect the rotor belt. If it is broken then it
If belt is not broken, check its tightness and
adjust, if necessary.
RIRS 400-700 V EKO 3.0 v2023.1