Heater Maintenance; Control Board Maintenance - Salda RIRS EKO 3.0 400 VEL Mounting And Installation Instruction

• Do not plunge the motor in
• Make sure the impeller is free of any obstacles.
•
• In case the fan does not automatically start up or stop
panel.
Prior to commencing any maintenance or repair works, make sure the unit is disconnected from the power source.
6.7.

HEATER MAINTENANCE

•
•
•
• After activation of the manually restored protection device, make sure
• If necessary, the electric heater can be removed. Disconnect the electrical connector from the heater and remove the heater.
6.8.

CONTROL BOARD MAINTENANCE

•
• Open the cover of the product.
•
• Remove the control box cover.
•
• Remove the control board.
•
and connector to the corresponding connection terminal and connector.
RIRS 400-700 V EKO 3.0 v2023.1
after maintenance, contact the manufacturer.
stop completely.
The
that
in place.
EN | 15