On/Off - Standby Mode - Simrad AP16 Manual

Simrad AP16 Autopilot
The control unit shown above can operate as a stand alone unit
in an autopilot system or combined in a multistation system. In a
multistation system the command can easily be transferred from
one unit to another. AP16 units not in control will display the
icon.
The AP16 system is capable of the following primary steering
modes: STBY (power steering), AUTO, NAV and WIND, each
mode having a dedicated push button.
Each of the mode push buttons is clearly identified with the
primary function in large text, and a secondary function listed in
smaller text. Each button provides you with a multiple function
mode display.
A group of user adjustable settings are provided in the AP16
User Setup Menu (page 39).
Alarms are presented in plain text to alert you of system and
external data failure conditions. Alarms include both audible and
visual presentations. The alarm listing is on page 124.
2.2

ON/OFF - Standby mode

At first time turn on see paragraph 4.1.
Note !
A single press on the STBY button switches the system ON and
the following status displays are shown:
SW and HW revisions shown are examples only.
16
Autopilot model
Software version
SimNet no.
Autopilot computer model
Software version
Power board revision
Main board revision
Simrad
AP16
SW 1.2.01
HW rev. 00
Sn xxxxxx
Simrad
AC20
SW 1.2.01
P00 M00 S000
Software release
Hardware revision
Software release
Self check
20221560E