Providing User Training - Simrad AP16 Manual

Providing user training

The user should be instructed in the "basic" operational
functions, such as:
− Turning the system on and off
− Changing modes. Explain briefly what takes place in the
− Regaining manual control from any mode. Point out in what
− Taking command at an "inactive" station, if applicable.
− Using the lock mode, how to lock/unlock and how to shut the
− Use of the Non-Follow-up steering mode.
− Use of a Non-Follow-up controller, if connected.
− Changing course by STBD 1, STBD 10, PORT 1 and
− Stepping through the User Set-up Menu learning how to (and
− How to select alternative sources for heading (compass),
− Understand the difference between NAV mode and NoDrift
− Locating compasses and knowing to keep magnetic items
− Locating the Mains circuit breaker and the separate SimNet
20221560E
different modes.
modes the helm is engaged by the autopilot (bypass/clutch).
system down from a locked control unit, if applicable.
PORT 10 buttons.
why to) change the settings.
navigation (GPS), chartplotter, speed, depth etc. if available.
mode and their data sources (Nav, Pos)..
away.
circuit breaker if provided.
Configuration and setup
119