Sony STR-DG600 Operating Instructions Manual page 85

Frequency respouse
Analog
lnputs
Analog
10 Hz- 70 kHz
+0.5/ 2 dB (with sound
field and equalizer
bypassed)
Sensitivity: 500 mV/
50 kohms
S/N3): 96 dB
(A,
500
mV 4))
Digital (Cnaxial) hnpedance: 75 nhms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT Voltage: 500 mV/10 knhms
SUB WOOFER, SURROUND
Voltage: 2 V/I kohm
Equalizer
Gain levels -+6 dB, I dB step
3)INPUT SHORT (with sound field and equalizer
bypassed).
4)Weighted network, input level.
FM tuner section
Tuning range 87.5 - 108.0 MHz
Intermediate frequency
10.7 MHz
Useable sensitivity 11.2 dBL I pV/75 ohms
SIN
Mouo/Stereo 76 dB/70 dB
Harmouic distortion at 1 kHz
Mnuo/Stereo 0.3%/0.5%
Separation 45 dB at 1 kHz
Frequeucy response 30 Hz - 15 kHz,
+0.5_2 dB
AM tuner section
Tuuiug rauge
Area code Tuning scale
10kHzstep 9 kHz step
U, CA 530 53 I
1,710 kHz 5) 1,710 kHz 5)
Intermediate frequency
450 kHz
Usable sensitivity 50 dB _/m (at 1,000 kHz or
999 kHz)
5)You can change the AM tuuing scale to 9 kHz or
10 kHz. After tuning in auy AM station, turn off
the receiver. While holding down TUNING
MODE, press I/(_. All preset stations will be
erased when you chauge the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
Video section
Inputs/Outputs
Vide(): 1 Vp-p/75 ohms
S-video: Y: 1 Vp-p/75 ohms
C: 0.286 Vp-p/75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p/75 ohms
PB/CB/B-Y:0.7 Vp-p/
75 ohms
PR/CR/R-Y:0.7 Vp-p/
75 ohms
80 MHz HD Pass Through
General
Power requiremeuts
Area code Power requirements
U, CA 120 V AC, 60 Hz
Power
cnUSUHI plinll
Area code Power consumption
_>
U 230 W _.
(TA 31o VA _:
Pnwer consumptinn (during slaudby mode)
O.2 w 3"
AC nullets g
Area code AC outlets _.
U, CA 1s'_x itchecl, 120W/IA MAX
Dimensions (w/fi/d) (Approx.)
430 x 157.5 x 316 mm
(16 718 x 6 218 x 12 418
inches) including
projecting parts and
cnntrols
Mass (Apprnx.) 8.0 kg (17 lb 11 oz)
continued_
85us