Sony STR-DG600 Operating Instructions Manual page 14

Name
AUDIO
ANGLE
JUMP/TIME
MEMORY
SUBTITLE
ENTER
Numeric
buttons
>10/11
Function
Press to change tile sound to
Multiplex, Bilingual or Multi
channel TV sound of tile TV.
VCR. DVD player, satellite
tuner. Blu-ray disc recorder.
hard disc recorder, or PSX.
Press to select the viewing
angle or change tile attgles of
tile DVD player or Blu-ray
disc recorder.
Press to
toggle between the previous
and the current channels of
the satellite tunel_ TV. or
Blu-ray disc recorder.
show the time or display the
playing time of a disc. etc. of
the CD player. MD deck.
VCD player, or DVD player.
Press MEMORY to store a
station.
Press ALT/[_) :rod then press
SUBTITLE tit change the
subtitles of the DVD player.
Press ALT 1[_) and then press
ENTER to enter the value
after selecting a channel, disc
or track using the numeric
buttons.
Press ALT ([_) and then press
the numeric buttons to
preset/tune to preset
stations.
select track numbers of the
CD player. VCD player. LD
player, DVD player, MD
deck. DAT deck. or tape
deck. Press 0/lit tit select
tr:lL'k t_lumber I O.
select channel numbers of
the TV. VCR. satellite tuner.
Bit>ray disc recorder, hard
disc recorder, or PSX.
Press ALT/[_) and then press
>10/11 to select track
numbers over 10 of the CD
player, VCD player. LD
player, MD deck. tape deck.
TV. VCR. Blu-ray disc
recorder, hard disc recorder.
PSX. or satellite tuner.
Name Function
[] Input buttons Press one of the buttons to
select the component you
want tit use. When you press
any of the input buttons, the
receiver turns oil. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components following the
steps in "Progr:unnfing the
remote" on page 75.
Button Assigned Sony
component
VIDEO I VCR (VTR nlode 3)
VIDEO2 VCR (VTR mode 1)
VIDEO3 VCR (VTR nlode 2)
DVD DVD player
MD/TAPE MD deck
SA-CD/CD Super Audio CD/CD
player
TUNER Buill-in tuner
AUX Not assigned
[] TV I/(_ Press to turn the TV on or off.
[] RM SET UP Press Io sel tip the remote.
a)The MASTER VOL +. TV VOL +. TV CH + and
E: : :> buttons hax e tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore. depending on the
component, the above operation may not be
possible or may operate differently than described.
• The 12 button on the remote is not available 17_r
receiver operation.
14us