Sony STR-DG600 Operating Instructions Manual page 24

The image from a visual component connected
to this receiver call be displayed on a TV
screen.
It is not necessary to connect all the cables.
Connect video cords according to the jacks of
your components.
Notes
• Connect image displa_ components such as a TV
monitor or a prt_iector to the MONITOR OUT jack
on the receiver.
• Turn on the receiver when the vide() and audio of a
playback component are being output to a TV via
the receiver. If the power supply of the receiver is
not turned on, neither video nor audio is
transmitted.
Tip
Youcan watch tileselected input image when you
connect the MONITOR OUT jack to a TV monitor.
O O
S-video cord (not supplied)
_Video cord (not supplied)
0 Component video cord (not supplied)
24us