Sony STR-DG600 Operating Instructions Manual page 56

If you connect a sub woofer
This receiver will generate a low frequency
signal for output to the sub woofer when there
is no LFE signal, which is a low-pass sound
effect output from a sub woofer to a 2 channel
signal. However, the low frequency signal is
not generated for "NEO6 CIN" or "NEO6
MUS" when all speakers are set to "LARGE".
Notes
• This function does not work _hen MULTI CH IN
or ANALOG DIRECT is selected.
• DTS Neo:6 does not work lk_rDTS 2CH audio, the
sound is played as 2 channeh
• Dolby Pro Logic llx decoding does not function for
DTS lk_rmatsignals or l\w signals with a sampling
frequency of more than 48 kHz.
Tip
When a multi channel signal is input, only Dolby
Pro Logic Ilx decoding is effective. When you select
decoding modes other than Dolby Pro Logic llx,
multi channel sound (being encoded/is output.
Selectinga pre-
programmed soundfield
You can take advantage of surround sound
simply by selecting one of the receiver's pre-
programmed sound fields. They bring the
exciting and powerfld sound of movie theaters
and concert halls into your home.
Press MOVIE repeatedly to select a
sound field for movies or press
M USIC repeatedly to select a sound
field for music.
For details, see "Types of sound fiekt
available" (page 57).
56 us