Sony STR-DG600 Operating Instructions Manual page 39

2
__3
MULTI CHANNEL DECODING lamp
....
Notes
• Refer ta the aperating
instructions supplied with the
TV and DVD player.
• Check the following if you
cannot listen to multi channel
Souud.
Be sure the sound source
corresponds to the multi
channel lk_rmat/the MULTI
CHANNEL DECODING
lamp on the front panel lights
up during playback).
Be sure this receiver is
connected to the DVD player
via a digital connection.
Be sure the digital audio
output of the DVD player is
set up praperly.
Tips
• Select the sound format of the
disc to be played, if necessary.
• You can select the sound field to
suit the movie/music. Refer ta
page 56 for details.
Recommeuded sound fields:
Movie: C.ST.EX
Music: CONCERT
1
Turn on the TV and DVD player.
2 Turn on the receiver.
3 Press DVD.
You can also use INPUT SELECTOR on this receiver to
select DVD.
4
Switch the input of the TV so that an image
of the DVD is displayed.
5 Set up the DVD player.
Refer to "Quick Setup Guide" supplied with the receiver.
6
Playback the disc.
7 Adjust to a suitable volume.
8 After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player.
39us