Sony STR-DG600 Operating Instructions Manual page 31

3 Press MEMORY/ENTER.
After "CLEARING" appears on tile
display for a while, "CLEARED"
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, EQ, SUR,
TUNER, AUDIO, VIDEO and
SYSTEM menus.
• The sound fieM memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names t_r inputs and preset
stations.
• MASTER VOLUME is set to "VOL
MIN".
• Input is set to "DVD".
Note
Before "CLEARIN(-;" appears on the display,
"TURNING" and "OFF" appears alternately and
then "COMPLETE" appears.
Insert two R6 (size-AA) batteries in the _.
RM-AAP012 remote commander. ,,',
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix alkaline batteries and other kinds of
batteries.
• Do not expose the rmnote sensor to direct sunlight
or lighting :_ppamtuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time. remove the batteries to
avoid possible damage from battery leakage and
corrosion.
Tip
Under normal conditions, the batteries shonhl last
lbr about 3 months. When the remote no longer
operates the receiver, replace all the batteries with
new ones.
31us