Sony STR-DG600 Operating Instructions Manual page 23

Receiver MONITOR OUT jack
Receiver INPUT jack
Video component OUTPUT jack
COMPONENT
VIDEO S-VIDEO VIDEO
@@@ (@
COMPONENT processing
VIDEO S-VIDEO VIDEO
@@@ (@
£3
(,Q
Notes
• Connect image displ:_y components such :is :JTV
monitor or a projector to tile MONITOR O{JT.jack
on the receiver.
• Turn on the receiver when the video and audie efa
playback cornpenent are being output tea TV
through the receiver. If the power supply of the
receiver is net on. neither video nor audio is
transmitted.
Converting video signals
This receix.er is equipped with a function for
converting video signals. You can output the
video signal alter connecting this receiver via
the MONITOR OUT jack as shown in the
illustration.
Video signals can be output as S-video signals
and this upconverted video signals can only be
output from the S-video MONITOR OUT
jack.
High quality image
Note on converting video signals
When video signals from a VCR, etc., are
converted on this receiver and then output to
your TV, depending on the status of the video
signal output, the image on the TV screen may
appear distorted horizontally or no image may
be output.
Reassigning video input signals
to another input
Component ",,Meo input signals can be
reassigned to another input (page 71 ).
23us