Sony STR-DG600 Operating Instructions Manual page 65

XM will send a signal from the satellites to
activate the full channel lineup. Activation
normally takes 10 to 15 minutes, but during
peak busy periods, you may need to keep your
player on for up to an hour. When you can
access the full channel lineup on your player,
you're done.
Note
Residents in Canacl:_ please see inl'ormatiou about
XM Canada at the lk_llowiug wehpage:
Ihttp:/l_x ww.xmradio.ca/).
2
Before operating the system, connect the XM
Connect-and-Play antenna to the XM jack.
XM jack
Note
Ta ensure optimal reception of XM's satelite signal,
move
your
antenna to various window locations
around your home to see where the best reception
will be received. Most XM customers place the
antenna in a south_facing window with a clear view
to the sky.
2
3
Press TUNER repeatedly to
select "XM RADIO".
You can also use INPUT SELECTOR on
the receiver.
-1
Press TUNING + or TUNING-to O
select channel 0.
You can also press TUNING MODE on _.
U
the receiver to select "AUTO T.", and then "_
turn TUNING +/ to select channel 0.
Check the XM Radio ID on the
display and write it in the space
provided here.
ID:
If you cannot read the characters or
numbers on the display, refer to the
following table.
continued_
65us