Sony STR-DG600 Operating Instructions Manual page 48

Settingsfor the audio
(AUDIO menu)
You can use the AUDIO menu to make settings
for the audio to suit your preference.
Select "5-AUDIO" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 40) and
"Oveta.'iew of the menus" (page 41 ).
AUDIO menu parameters
• DEC. PRI. (Digital audio input
decoding priority)
Lets you specify the input mode for the digital
signal input to the DIGITAL IN jacks.
• DEC. AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.
• DEC. PCM
PCM signals are given priority (to prevent
interruption when playback starts).
However, when other signals are input, there
may be no sound depending on the format.
In this case, set to "DEC. AUTO".
Note
When set to "DEC. AUTO" and the sound from the
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to "DEC. PCM".
• DUAL (Digital broadcast
language selection)
Lets you select the hmguage you want to listen
to during digital broadcast. This feature only
fimctions for Dolby Digital sources.
• DUAL M/S (Main/Sub)
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
• DUAL M (Main)
Sound of the main language will be output.
• DUAL S (Sub)
Sound of the sub language will be output.
• DUAL M+S (Main + Sub)
Mixed sound of both the main and sub
languages will be output.
• A.V. SYNC. (A/V Sync)
Lets you delay tile andio output so that the
time gap between the audio output and visual
display is minimized. You can adjust from
0 (0 ins) to 20 (200 ins) in 1 (10 ms) steps.
• NAME IN (Naming inputs)
Lets you set tile name of inputs. For details, see
"Naming inputs" (page 72).
48us