Sony STR-DG600 Operating Instructions Manual page 67

You can select a channel from one category or
all the categories by changing the category
mode.
Notes
• When _ou select a chaunel in the "ONE CAT"
mode, the cbaunel you selected may not be tile one
in the category you want. This is because one
channel may belong to more than one category.
• If you press CATEGORY + or CATEGORY in
the "ALL (!AT" mode, tile first channel of tile next
or previous category is selected (CATEGORY
SKIP).
2
3
4
Press TUNER repeatedly to
select "XM RADIO".
You can also use INPUT SELECTOR on
the receiver.
Press CATEGORY MODE
repeatedly to select the "ONE
CAT".
• ALL (!AT: You can select a channel from all
the categories. The initial setting is "ALL
(?AT".
• ONE (?AT: You can select a channel from one
category. "CAT" is displayed on the display
when you set to "ONE CAT" mode.
Press CATEGORY + or
CATEGORY - to select the
category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
Press TUNING + or TUNING - to
select the channel.
You can also press TUNING MODE on
the receiver to select "AUTO T.", and then
turn TUNING +1- to select the channel.
2
3
4
_
_
Press TUNER repeatedly to
select "XM RADIO".
You can also use INPUT SELECTOR on
tile receiver.
Press D.TUNING.
Press the numeric buttons to
enter the channel number.
Press ENTER.
You can also _ase MEMORY/ENTER on
the receiver.
The selected channel is tune in.
-1
O
B"
67us